LG-Nortel iPECS-50 Administrator And Maintenance Manual page 126

IPECS Release 5
Admin & Maintenance
Table 2.3.9.1.1-1 LCR CONTROL ATTRIBUTES (PGM 220)
Button ATTRIBUTE/DISPLAY
1
LCR ACCESS MODE (1-6)
(M00) DISABLE LCR
2
DAY ZN 1:1234567 2: 3:
M1 T2 W3 T4 F5 SA6 SU7
3
TIME ZONE 1
1:00-24 :
4
TIME ZONE 2
1:00-24 2 :
5
TIME ZONE 3
1:00-24 3 :
2.3.9.1.2 LCR Leading Digit Table -PGM Code 221-
The Leading Digit Table is used to analyze the user-dialed digits to determine an appropriate Digit
Modification Table Index. The Table is divided into bins. The applicable LCR Access Modes (LCR
Type) and the digits (up to the first 12) to be compared with the number dialed by the user are
entered in the Leading Digit Table bin. In addition, indices to the Digit Modification Table are
defined for each Time Zone of each Day Zone; refer to LCR Control Attributes
Note the mode used to access LCR must match the LCR Type and must be within the effective
LCR Access Mode assigned in
allowed LCR Types are:
CO Line or Loop access: User dials CO Line Access Code (88xx for iPECS-50 and
MFIM100 or 88xxx for other MFIMs), CO/IP Group Access Code (8xx), Any CO Line
Access Code '9', or presses a CO Line, CO/IP Group or Loop button.
Internal: User dials outgoing call while receiving Intercom dial tone with no CO/IP access
code.
Both: both COL and Internal
In addition, each Leading Digit Table bin has the option to require an authorization code entry.
When the user-dialed digits match an entry in the LCR Leading Digit Table, the system will check
the Authorization option for the LDT Table bin. If the Authorization option is enabled, the user
must enter a valid Authorization code to place the call.
DESCRIPTION
This entry defines the effective LCR modes,
the modes by which the user can access LCR.
For each day of the week, a Day Zone (1 to 3)
is assigned. The active Day Zone is the Zone
assigned to the current day of the week (Flex
button 1~7).
This entry defines the hours of the day during
which Time Zone 1 is active. Note hours not
defined in Time Zone 2 and 3 are
automatically part of Time Zone 1.
This entry defines the hours of the day during
which Time Zone 2 is active.
This entry defines the hours of the day during
which Time Zone 3 is active.
220 to access the Digit Modification Table index. The
PGM CODE
2-107
Issue 5.0
RANGE DEFAULT
M00: 1 1
M01: 2
M02: 3
M11: 4
M12: 5
M13: 6
Flex 1~7 + Zone 1: all
1~3 days of the
week
00~24 00-24
00~24
00~24
220.
PGM CODE