Network Supplementary Attribute -Pgm Code 321- - LG-Nortel iPECS-50 Administrator And Maintenance Manual

IPECS Release 5
Admin & Maintenance

2.3.10.2 Network Supplementary Attribute -PGM Code 321-

PROCEDURE:
NET SUPPLEMENTARY ATTR
PRESS FLEX KEY (1-8)
Refer to Table 2.3.10.2-1
DISPLAY
Table 2.3.10.2-1 NETWORK SUPPLEMENTARY ATTRIBUTE (PGM 321)
Button DISPLAY
1
NET TRANSFER MODE
(1:RERT/0:JOIN) :REROUT
2
TCP PORT FOR BLF
(9500-9999) :9500
3
UDP PORT FOR BLF
(9500-9999) :9501
4
BLF MANAGER IP
0 .0 .0 .0
5
DURATION OF BLF STS
(01-99) 100 mm sec
6
MULTI CAST IP
0 .0 .0 .0
7
NET TRANS FAULT RCL TMR
(001-300)sec
8
VOIP CALL REROUTE CO GR
(00-72) : 00
9
BLF SERVICE USAGE
(1:ON/:OFF) :OFF
1. Press the [PGM] button and dial 321.
2. Press Flex button 1~7 for the desired setting, refer to Table 2.3.10.2-1.
3. Use the dial-pad to enter the required data, refer to Table 2.3.10.2-1.
4. Press the [SAVE] button to store the new data.
DESCRIPTION
Select type for Transfer and Call forward
– Rerouting or Join
TCP port for sending BLF message to BLF
Manager
UDP port for sending BLF message to BLF
Manager
IP Address of BLF Server used only when
iPECS is configured with LDK systems for
Voice Networking
Duration of BLF status message sending to
BLF Server.
: 10
IP address of Multicast for BLF service
Network transfer fault recall timer to be used
: 010 when no responses from other systems.
SIP outgoing call is rerouted via alternative
backup CO line when received call fail reason
or there is no answer during 3 seconds
Enable/disable for BLF manager function.
2-124
Issue 5.0
RANGE DEFAULT
1:RERT REROUT
0:JOIN
0000-9999 9500
0000-9999 9501
0.0.0.0
01-99 10
(msec)
0.0.0.0
001-300 10
(seconds)
00-22 or 00
00-72
0: OFF OFF
1: ON