LG-Nortel iPECS-50 Administrator And Maintenance Manual page 186

IPECS Release 5
Admin & Maintenance
ATTRIBUTE
Call Forward
DND
Data Security
Howling Tone to SLT
No-Touch Answer
Page Access
Headset Ring
Speakerphone
LCD Display LED
Loop LCR Account
Call Coverage Mode
Call Cover Delay Ring
Offnet Forward
Forced hands Free Mode
Active PTT Group Number
ICM Tenancy Group
Call Time Tone
Automatic Hold
Call Time Restriction
Individual CO Access
DESCRIPTION
Enables Call Forward to be activated by the station.
Enables DND to be activated by the station.
Disables override and camp-on tones to the station.
Permits Howler tone to be sent to an SLT when left
off-hook.
Enables No-touch answer, which automatically
connects transferred calls to the station's
speakerphone.
Allows station to access paging facilities.
Selects device to receive incoming ring signals,
Speaker, Headset or Both.
Selects Speakerphone or Headset mode
The LCD LED, upper left of LCD, may be used for
Intercom Call ring Indication or Message Wait
Indication.
Station based LOOP LCR authorization used for
LOOP LCR operation.
The Call Coverage feature permits an iPECS Phone
user to receive ring and answer calls at other
stations.
When a covered station rings, the {
button LED will flash at the covering station and the
station will receive ring (immediate or delayed, 0 to 9
ring cycles).
A station must be allowed Off Net Fwd to forward
external incoming calls outside the system or
otherwise establish a CO-to-CO connection
(Unsupervised Conference). (Except USA version)
When placing an intercom call, a user can change
the ICM signaling mode, Tone Ring to Hands free
answer mode or HF Answer to Tone Ring.
A station can be assigned to a PTT group and the
group enabled so the station can place and receive
PTT announcements for the group.
Assigns stations to an ICM Tenancy Group.
A tone can be sent periodically indicating the elapsed
time of an outgoing CO/IP call. The Elapsed Call
Timer, see System Timers section 3.5.5.20,
determines the period between tones.
Enables Auto Hold for the station. With Auto Hold
enabled, the system will place an active external call
on hold if the user presses a CO/IP or DSS button.
All outgoing calls will disconnect at expiration of the
Call Restrict Timer, see System Timers section
3.5.5.20.
Permits stations to use dial codes to access
individual CO Lines.
3-24
RANGE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Speaker
Headset
Both
Speaker
Headset
RING
MWI
ON
OFF
ON
OFF
}
0~9
CALL COVERAGE
Enable
Disable
ON
OFF
0~9
1~15
ON
OFF
ON
OFF
ON
OFF
ENABLE
DISABLE
Issue 5.0
DEFAULT
OFF
OFF
OFF
ON
OFF
OFF
SPEAKER
SPEAKER
MWI
OFF
OFF
0
ENABLE
OFF
1
OFF
Atd: ON
Others: OFF
OFF
Enable