LG-Nortel iPECS-50 Administrator And Maintenance Manual page 206

IPECS Release 5
Admin & Maintenance
ATTRIBUTE
Register User Name
Authentication User
Name
Authentication User
Password
Contact Number
Asc Station Number
User ID Register
User ID Usage
Ring Route Type
DID Conversion Type
Number of Digits (2-4)
Expected from DID
Circuit
DID Digit Mask (4digits:
*,#,0-9
Table 3.5.2.15-1 STATION SIP ATTRIBUTES 2
DESCRIPTION
User ID.
Authentication name assigned in SIP Proxy when
required for registration.
User password as assigned in SIP Proxy when
required for registration.
SIP URL or AOR consisting of the user name and the
host domain name or IP address (me@abcco.com).
This field assigns a station to receive incoming calls for
the User ID index when "ID Assigned Station" is
defined as the Ring Route Type below. In addition this
station will receive messages resulting from the SIP
Notify method to the iPECS VoIP channels, such as
Msg wait, Line busy, etc.
In some situations such as during provisioning of the
SIP Server or Proxy, it may be desirable not to attempt
registration. This field may be used to determine if
registration should occur.
If registration is enabled (User ID Register above) the
iPECS SIP gateway (VoIP channels) can send the
User ID to the SIP Proxy to register the ID. Otherwise,
the Authentication Name and password are used.
Incoming calls from a SIP trunk can be routed based
on CO/IP Ring assignments (
the defined Associated station above (ID Assigned
Station) or DID treatment (defined below)
When the Ring Route above is defined as DID, the
system will send the call to a destination based on the
DID conversion selected here. The digits may be used
as is to identify the desired station, modified based on
the DID Digit mask below and routed to the resulting
station or the modified DID number can be used as an
index to the DID routing table,
the call.
When DID Digit Conversion or Flexible DID
Conversion Table routing is used, the number of digits
received is defined in this field.
When DID Digit Conversion or Flexible DID
Conversion Table routing is used, the digit conversion
is defined in this field.
3-44
144), routed to
PGM CODE
231 to route
PGM CODE
Issue 5.0
RANGE DEFAULT
40 characters
40 characters
18 digits
Station number
Register Register
Provision
ON/OFF OFF
ID Assigned Sta, ID assigned
Ring Assign, Station
DID Conversion
DID Digit
Conversion,
Use "as is" or
Use Flex DID
Table
2-4 3
#***