Flexible Station Numbering Plan - LG-Nortel iPECS-50 Administrator And Maintenance Manual

IPECS Release 5
Admin & Maintenance

3.5.1.4 Flexible Station Numbering Plan

Re: 105
PGM CODE
Selecting Flexible Station Number will return the data entry page, Figure 3.5.1.4-1. This page
permits changes in the Station Numbering Plan using one of three methods:
Not Use Range Input: use to change an individual station number.
Order Range: use to change the station numbers associated with a range of "Order
Numbers" using the "Start Station Number" as the first station number to assign in the
range. The station number is incremented by one over the range of Order numbers.
Station Range: use to change station numbers over a range of stations using the "Start
Station Number" as the first station number of the range.
incremented by one for each successive station in the range.
Selecting a Station Order Range, blue text in the table header, will display the Station Numbering
Plan information for the selected Order Range.
As with gateway Modules, each iPECS Phone and SLT is assigned a logical sequence number,
shown as the "Order" number on the Web page, during the registration process. The station order
number is incremented from 1 as each terminal device is registered.
numbers increment sequentially with the Order number and are assigned starting at station 100.
The Station Numbering Plan allows the station numbers to be two (2) to four (4) digits in length.
Figure 3.5.1.4-1 Flexible Station Number
3-17
Issue 5.0
The station number is
At registration, station