LG-Nortel iPECS-50 Administrator And Maintenance Manual page 116

IPECS Release 5
Admin & Maintenance
Button ATTRIBUTE/DISPLAY
11
RING 624 MAX QUE C-CNT
(00-99) : 99
12
RING 624 MBR FORWARD
(1 : ON/ 0: OFF) : ON
13
MAILBOX MSG WAIT STA
. . . .
14
MAILBOX PASSWORD
............
15
RING 621 FORCED DEST
S/H/V/SPD (DIAL 1-4)
16
FORCED FWD DEST USAGE
(1:ON/0:OFF): OFF
17
WAIT IF 1ST ANNC BUSY
(1:ON/0:OFF): ON
Table 2.3.7.2-4 STATION GROUP ATTRIBUTES (PGM 191)
Button ATTRIBUTE/DISPLAY
1
VM 626 WRAP-UP TMR
(002 – 999) : 002
2
VM 626 PUT MAIL INDEX
(1 – 4) : 1
3
VM 626 GET MAIL INDEX
(1 – 4) : 2
4
VM 626 HUNT TYPE
(1 : CIR/ 0 : TERM): TERM
5
VM 626 OVERFLOW TMR
(000 - 600) : 180
6
VM 626 OVERFLOW DEST
S/H/V/SPD (Dial 1-4)
7
FORCED FWD DEST USAGE
(1:ON/0:OFF): OFF
8
VM 621 FORCED DEST
S/H/V/SPD (DIAL 1-4)
DESCRIPTION
When the number of calls queued is
reached, new calls will receive error tone
and be disconnected after the VSF AA
announcement, if assigned, is played.
A member activating Call Forward may be
placed in an unavailable state for hunt
group calls (ON). When OFF, group calls
are sent to the member as normal.
When a group call overflows or routes to
the VM group, a station number is used to
identify the Mailbox for the Ring group
messages.
The password associated with a group
Mailbox is defined here. The password is
used in conjunction with the Ring group as
with a normal station.
When a call is delivered to the group the
system can redirect the call to the Forced
destination if enabled under btn 16 below.
Enables the system to redirect group calls
to the Forced destination defined under btn
15 above.
When a call assigned to receive an
announcement arrives and all channels are
busy, the call may wait with Ringback until
a channel is available (ON) or bypass the
announcement.
EXTERNAL VM GROUPS
DESCRIPTION
After terminating any call, the VM port will be
maintained in a busy state for the duration of
the WRAP-UP TiMeR.
For external analog Voice Mail groups, an
index to the Voice Mail Dial Table, which
contains the "Put Mail" dial code.
For external analog Voice Mail groups, an
index to the Voice Mail Dial Table, which
contains the "Get Mail" dial code.
The type of Hunt process applied to the SLT
ports connected to the VM can be assigned
as Circular or Terminal.
A call to a group will remain queued to the
group or be sent to the assigned
OVERFLOW DEST after expiration of the
OVERFLOW TMR
A call to the group will continue to route
through the group until answered or all group
members have been tried. The call will
remain at the last station or routes to the
assigned OVERFLOW DEST.
When a call is delivered to the group the
system can redirect the call to the Forced
destination if enabled under btn 8 below.
Enables the system to redirect group calls to
the Forced destination defined under btn 7
above.
2-97
Issue 5.0
RANGE DEFAULT
00-99 99
0: OFF ON
1: ON
Station ....
12 digits ...
1-4 .
0: OFF
OFF
1: ON
0: OFF ON
1: ON
RANGE DEFAULT
002~999
002
(seconds)
1~4
1
1~4
2
0: TERM
TERM
1: CIRC
000~600
180
(seconds)
Station or
-
Grp Number,
VSF
Announce,
System SPD
0: OFF
OFF
1: ON
1-4
.