LG-Nortel iPECS-50 Administrator And Maintenance Manual page 277

IPECS Release 5
Admin & Maintenance
Issue 5.0
3.8.2 Call Forward
Selecting Call Forward will display the input entry page, Figure 3.8.2-1. On this page, the user can
set Station or Preset Call Forward.
Figure 3.8.2-1 Call Forward
3.8.2.1 Station Call Forward
Stations can be programmed so that incoming calls are re-routed to other stations (local or
networked), station groups, the VSF, or over a system CO/IP line (Off-Net). Call Forward can be
separately assigned UNCONDITIONAL, BUSY, NO ANSWER, BUSY/NO ANSWER, Attendant
OFF-PREMISE forwarding to any station, hunt group or system speed dial bin (Off-net). In the
portal, users can establish forwarding scenarios under the Station ICR selection.
3.8.2.2 Preset Call Forward
Stations can be programmed so that incoming CO and Intercom calls are forwarded to a preset
station or station group. This allows an external or internal call to initially ring at a station and
forward to a pre-determined destination. Preset Forward can be separately assigned
UNCONDITIONAL, INTERNAL BUSY, INTERNAL NO ANSWER, EXTERNAL BUSY, EXTERNAL
NO ANSWER preset forwarding to any station, hunt group or system speed dial bin (off-net). As a
default, no Preset Call Forward is assigned. Also, for the Transfer to Mailbox, enter the Station
Group number of the Voice Mail group (external VM, VSF or Feature Server Voice Mail group).
This permits users to send calls directly to the desired Voice Mail-Box.
3-238