Station Icm Tenancy Group - LG-Nortel iPECS-50 Administrator And Maintenance Manual

IPECS Release 5
Admin & Maintenance

3.5.2.14 Station ICM Tenancy Group

Re: 125
PGM CODE
Selecting Station ICM Group displays the Station ICM Group input page, Figure 3.5.2.14-1. Select
ICM Tenant Group, the system will display the ICM Tenant Group Characteristics. Check the
appropriate box to allow access to the group and enter the station number of the group Attendant.
Stations can be assigned to an ICM Tenancy group under Station Attributes section 3.5.2.2. Up to
15 Tenant groups can be defined. Each group is configured to allow or deny placing intercom calls
to stations in other groups and an Attendant station can be defined for each group.
Table 3.5.2.14-1 STATION ICM TENANCY GROUP ATTRIBUTES
ATTRIBUTE
Tenancy Atd.
Group Access
Figure 3.5.2.14-1 Station ICM Tenancy Group
DESCRIPTION
Attendant station for the ICM Tenant group. Atd. receives
dial '0' calls and controls Day/Night Service.
ICM tenancy groups allowed access by stations of the
selected group.
3-42
Issue 5.0
RANGE DEFAULT
Station No.
1~15 1