LG-Nortel iPECS-50 Administrator And Maintenance Manual page 216

IPECS Release 5
Admin & Maintenance
ATTRIBUTE
Connection Mode
181 Being Forwarded
100rel support
Use single codec only
Use rport method
Domain
Invite Acceptance
Contact Address Domain
P-Asserted-Identity
Proxy Registration Timer
Proxy Server Port
Registration UID Range
DTMF Type
DESCRIPTION
This field establishes the SIP connection mode as
TCP (ON) or UDP (OFF) for SIP signaling messages
SIP 181 message is sent when call is being redirected
or forwarded, if enabled.
Provisional messages, Ack for provisional messages
During capabilities negotiation, the system can send a
single codec id or all codes supported.
When employed behind a NAPT server, device will
add Rport header in SIP message to indicate port in
use.
Domain name associated with iPECS VOIM channels.
Is used in SIP "TO: header message" to SIP Server.
Required when the Proxy uses a port other than 5060.
Allow invite message from domain or anywhere
Contact Address Domain part option. Address of SIP
gateway' or (Server) Domain is used
Address and Tel number of Caller
Time-out for registration
Default port for SIP messages to proxy
Defines the range of User IDs from Station SIP
Attributes 2 to register with the SIP Registrar Server.
DTMF sending mode
3-54
Issue 5.0
RANGE DEFAULT
ON/OFF OFF
NOT USE/USE USE
ON/OFF OFF
ON/OFF OFF
ON/OFF OFF
Max 32
Characters
Domain Only From All
From All
SIP GW Addr SIP GW Addr
Server Domain
Port 5060
UID Table index
(000-150)
INBAND
2833
INFO (DTMF)
INFO (DTMF
RELAY)