Disa Service Attributes -Pgm Code 146; Disa Service Attributes - LG-Nortel iPECS-50 Administrator And Maintenance Manual

IPECS Release 5
Admin & Maintenance

2.3.5.5 DISA Service Attributes -PGM Code 146-

DISA Service can be enabled on CO lines based on the system operation mode (Day, Night, and
Timed). DISA calls may be routed to dial tone and await user dialing (simple routing) or through a
multi-layered Audio Text menu assigning a VSF AA Announcement/Customer Call Route (CCR)
Table Index. The system can be instructed to disconnect after the announcement or follow the
CCR Table routing with a user-recorded announcement requesting specific inputs from the user.
PROCEDURE:
DISA ATTRIBUTES
ENTER COL RANGE
01-02 DISA ATTRIBUTE
F1:DAY F2:NIGHT F3:TIMED
001-002 DISA ATTRIBUTE
DAY SERVICE 00 (00 – 71)
1. Press the [PGM] button and dial 146.
2. Use the dial-pad to enter the CO Line range. For a single CO Line, enter the
same number twice. For the iPECS-50 and MFIM100 the acceptable range is
01~42, for the MFIM300 the acceptable range is 001~200 and for the
MFIM600 the range is 001~400.
3. Select the desired Flex button:
Button 1: Day
Button 2: Night
Button 3: Timed
4. Use the dial-pad to enter the desired VSF AA Announcement, (00: disabled,
01~70 CCR Table index
after the entry to include a "drop after announcement instruction".
5. Press the [SAVE] button to store the data entry.
2-50
228, or 71: await user digits). Enter '#'
PGM CODE
Issue 5.0