Foot Pedals Replacement - Matrix E5X-04 Service Manual

cHaptER 9: paRt REplacEMEnt guidE

9.14 foot pEdalS REplacEMEnt

1) Pull up on and remove the rubber portion of the pedal (Figure A).
2) Remove the 4 screws that hold the plastic pedal to the foot plate (Figure B).
figuRE a figuRE b
3) Remove the plastic foot pedal (Figure C).
figuRE c
4) Clean the foot plate to remove any rubber or debris.
5) Reverse Steps 1-4 to install a new foot pedal.
6) Test the Suspension Elliptical as outlined in Section 9.21.
52