Panasonic KX-TDA15 Features Manual page 255
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA15:
- User manual (232 pages) ,
- Installation manual (164 pages) ,
- Pt programming manual (66 pages)
Table of Contents
Advertisement
→ VM DTMF Status Signal—DND tone
→ VM DTMF Status Signal—Answer
→ VM DTMF Status Signal—Confirm
→ VM DTMF Status Signal—Disconnect
→ VM DTMF Status Signal—FWD to VM Ringback Tone
→ VM DTMF Status Signal—FWD to VM Busy Tone
→ VM DTMF Status Signal—FWD to Extension Ringback Tone
[Example]
Transfer
2
3
Sent "2".
Busy
Extn.
102
Conditions
•
Voice Mail (VM) Transfer Button
A flexible button can be customised as the Voice Mail (VM) Transfer button with the floating extension
number of the VM group as the parameter.
•
It is possible to assign the time period between when the VPS answers the call and the PBX sends the
Follow on ID to the VPS.
→ 3.9.19 [3-8-1] VM(DTMF) Group—System Settings—Timing—Waiting Time before Sending Follow
on ID
•
It is possible to assign the time period between when the VPS transfers the call using the AA service
to the PBX and the PBX sends the DTMF status signal to the VPS.
→ 3.9.19 [3-8-1] VM(DTMF) Group—System Settings—Timing—DTMF Length for VM
•
It is possible to select whether the mailbox number is the same as the extension number, or the mailbox
number is programmable for each extension number and incoming call distribution group (Mailbox
Access ID).
→ 3.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—Programmed
Mailbox No.
→ 3.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No.
→ 3.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No.
•
The Inter-digit time for the DTMF command and for DTMF status signal is programmable.
3.9.19 [3-8-1] VM(DTMF) Group—System Settings
→ Timing—Inter-digit Time
→ Timing—Waiting Time before Sending VM DTMF Status Signal
•
Data Line Security is set automatically on the extensions in the VM (DTMF) group to achieve proper
recording. (→ 1.10.5 Data Line Security)
1
PBX
Busy
4
Status
VPS
An incoming call reaches the VPS. The VPS greets
1
the caller: "Thank you for calling Panasonic. If you
know the extension number of the person you wish...
".
The caller dials the extension number (extn. 102).
2
The VPS will transfer the call to the extension via the
PBX.
If the extension is not available, the PBX sends
3
DTMF status signal of the extension (busy status) to
the VPS.
The VPS receives the DTMF status signal and send
4
the appropriate message to the caller: "Sorry. The
extension is busy. Would you like to leave a
message... ".
1.20 Voice Mail Features
Feature Guide
255
Advertisement
Table of Contents
