Panasonic KX-TDA15 Features Manual page 375

Light Pattern
Slow red flashing
Note
Any extension user (except extension users allowed to change the mode) can only check the
current status on the display by pressing the Time Service button.
Conditions
• PT programming can set the Start and/or End time of the following:
– Day-1 (Day Start time)
– Lunch (Lunch Start time)
– Day-2 (Lunch End time)
– Night (Night Start time)
PC programming can also set the following three time periods for break mode per day.
– Break-1 Start
– Break-1 End (Day restart)
– Break-2 Start
– Break-2 End (Day restart)
– Break-3 Start
– Break-3 End (Day restart)
• Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customised as the Time Service Switching Mode (Automatic/Manual) button.
Programming Manual References
PC Programming Manual
3.8.5 [2-4] Week Table
3.8.7 [2-5] Holiday Table
3.8.8 [2-6-1] Numbering Plan—Main—Features—Time Service (Day / Lunch / Break / Night) Switch
3.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Time Service Switch
3.10.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
→ Optional Parameter (Ringing Tone Type Number) (for Time Service)
3.10.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic / Manual)
→ Optional Parameter (or Ringing Tone Type Number) (for Time Service)
3.10.17 [4-3] DSS Console—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
Status
Holiday mode
2.2 System Configuration—Software
Feature Guide 375