Panasonic KX-TDA15 Features Manual page 209

Log display, the Personal Speed Dialling number display and the SVM Log display are also locked and
the voice messages in the user's message box cannot be played back. An extension personal
identification number (PIN) is required to use this feature. (→ 1.24.1 Extension Personal Identification
Number (PIN))
• Storing the Call Log Information in Personal Speed Dialling
When storing the number and name into Personal Speed Dialling from the call log information, the Idle
Line Access number is automatically attached to the telephone number.
• Incoming Call Log Memory
The total memory for the Incoming Call Log is determined in the PBX. The maximum number that can
be logged for each extension and incoming call distribution group is also determined through system
programming. If the memory becomes full, the new call record overwrites the oldest one.
• Call Log for Incoming Call Distribution Group Calls
If the original destination of a call is an incoming call distribution group, and the call is not answered,
the information is logged in the call log for the group. If it is answered, the information is logged in the
call log for the answering extension.
Through system programming, it is possible to select which Incoming Call Logs record call information
when a member of an incoming call distribution group answers a call to the group:
– Only the Incoming Call Log of the extension that answered the call.
– Both the Incoming Call Log of the extension that answered the call and that of the incoming call
distribution group.
Programming Manual References
PC Programming Manual
3.9.10 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD—Supervisor
Extension Number
3.9.12 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Call Log to ICD Group for
Answered Call
3.10.1 [4-1-1] Wired Extension—Extension Settings
→ Option 5—Incoming Call Display
→ Option 6—Incoming Call Log Memory
3.10.5 [4-1-4] Wired Extension—Flexible Button—Type
3.10.10 [4-2-1] Portable Station—Extension Settings
→ Option 5—Incoming Call Display
→ Option 6—Incoming Call Log Memory
3.10.17 [4-3] DSS Console—Flexible Button—Type
PT Programming Manual
None
Feature Guide References
1.6.1.4 Speed Dialling—Personal/System
1.18.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.12.1 Using the Call Log
3.1.2 Settings on the Programming Mode
1.16 Caller ID Features
Feature Guide 209