Panasonic KX-TDA15 Features Manual page 142

1.9 Automatic Route Selection (ARS) Features
[Programming Example]
Carrier Table
7
8 Carrier Name
Removed Number of Digits
9
Carrier Access Code
10
Trunk Group
11
Modify Command
12
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
→ 3.14.6 [8-5] Carrier—Authorisation Code for Tenant
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
→ 3.14.8 [8-7] Authorisation Code for TRG
Itemised Billing Code
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
→ 3.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—ARS Itemised Code
→ 3.10.10 [4-2-1] Portable Station—Extension Settings—Option 2—ARS Itemised Code
→ 3.12.3 [6-3] Verification Code—Itemised Billing Code for ARS
Conditions
WARNING
The software contained in the ARS feature to allow user access to the network must be upgraded to
recognise newly established network area codes and exchange codes as they are placed into
service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as
they are established will restrict the customer and users of the PBX from gaining access to the
network and to these codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
• Dialled Number on SMDR
It is possible to choose to print either the user-dialled number or the modified number on SMDR through
system programming. (→ 1.22.1 Station Message Detail Recording (SMDR))
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—ARS Dial
142 Feature Guide
1
A telecom B telecom
6 0
0077 0088
1, 2, 3 1, 2
CH#12 CH
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789 0077 6789 #12
Remove 6 digits.
9
13
15
2
12
H
Add the number.
#12
Add the Carrier Access
C
code ( ).
10
14