Panasonic KX-TDA15 Features Manual page 198

1.15 Optional Device Features
voice messages are being played, the line will remain connected until all voice messages finish playing.
This is because a reorder tone cannot be detected from an analogue line while playing voice messages.
• The first digit of the Walking COS feature number must be entered before the greeting message finishes
playing.
• When accessing SVM through a trunk, it is possible to change message boxes (e.g., to leave a
message in another user's message box after listening to one's own messages). However, a user can
only access the message boxes of other extensions assigned to the same SVM card. For example, if
the user accesses a message box belonging to SVM card 1 first, then the user can only access the
message boxes of other extensions belonging to SVM card 1. If the user tries to access the message
box of another extension belonging to a different card, the user will hear a reorder tone.
While a reorder tone is heard, it is possible to retry another call by pressing " ".
• Accessing the Message Box of Another Extension
Listening to voice messages left by callers using a Message button for another extension is available
only when voice messages have been left in the message box.
• It is not recommended to record music when creating a greeting message.
• The SVM card does not answer calls that are forwarded using the Call Forwarding by QSIG feature
(1.26.4.3 Call Forwarding (CF)—by QSIG).
Installation Manual References
2.5.5 SVM2 Card (KX-TDA3192)
Programming Manual References
PC Programming Manual
3.4.5 Tool—Simplified Voice Message—Delete All Recordings (KX-TDA30 only)
3.4.6 Tool—Simplified Voice Message—Check Current Usage (KX-TDA30 only)
3.8.4 [2-3] Timers & Counters—Miscellaneous
→ SVM—Recording Time (KX-TDA30 only)
→ SVM—Dial Tone Continuous Time (KX-TDA30 only)
3.8.8 [2-6-1] Numbering Plan—Main—Features—Simplified Voice Message Access (KX-TDA30 only)
3.9.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
→ Simplified Voice Message Tone Detection—Silence (KX-TDA30 only)
→ Simplified Voice Message Tone Detection—Continuous (KX-TDA30 only)
→ Simplified Voice Message Tone Detection—Cyclic (KX-TDA30 only)
3.10.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Display Lock / SVM Lock (KX-TDA30 only)
3.10.9 [4-1-7] Wired Extension—Simplified Voice Message (KX-TDA30 only)
3.10.10 [4-2-1] Portable Station—Extension Settings—Option 6—SVM Lock (KX-TDA30 only)
3.10.16 [4-2-5] Portable Station—Simplified Voice Message (KX-TDA30 only)
3.11.3 [5-3-1] Voice Message—DISA System
→ Recording Mode
→ Remote Access
3.11.5 [5-3-3] Voice Message—SVM (KX-TDA30 only)
PT Programming Manual
None
198 Feature Guide