Panasonic KX-TDA15 Features Manual page 280

1.22 Administrative Information Features
DID/DDI number
Secret dialling
Privacy dial
Date order
Received call
Answered call
Room status
Timed Reminder call
Printing Message
Time format
Conditions
• SMDR Format
The following SMDR format can be set through system programming in order to match the paper size
being used in the printer:
280 Feature Guide
Item
Controls whether the DID/DDI number, name, number and name,
or nothing is shown. If "none" is selected, <D> will not be shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—DDI/DID
Number & Name
Controls secret dialling. If enabled, the dialled number will be
shown as dots.
This setting is effective only when the modified number is selected
in ARS dial setting above. If the user-dialled number is selected in
ARS dial setting, the dialled number will be shown as dots
regardless of this setting.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Secret Dial
Enables or disables privacy dial. If enabled, the last four digits of
the dialled telephone number and any additional digits after
connection will be shown as "X". (e.g., 123-456-XXXX)
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Privacy Mode
The date order is changeable: month/day/year, day/month/year,
year/month/day, year/day/month.
→ 3.17.1 [11-1] Main—SMDR—SMDR Format—Date Format
Controls whether the time of receiving an incoming trunk call is
shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Condition Code
"RC"
Controls whether the time of answering an incoming trunk call is
shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR Options—Condition Code
"AN"
Controls whether room status changes are shown.
→ 3.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Room Status Control
Controls whether Timed Reminder calls are shown (→ 1.24.4
Timed Reminder).
→ 3.17.1 [11-1] Main—SMDR—SMDR for External Hotel
Application 1—Timed Reminder (Wake-up Call)
Specifies the messages that can be selected from an extension (→
1.22.2 Printing Message).
→ 3.12.9 [6-8] Hotel & Charge—Main—SMDR for External Hotel
Application 2—Printing Message 1–8
Controls whether time is displayed in 12-hour or 24-hour format.
→ 3.17.1 [11-1] Main—SMDR—SMDR Format—Time Format
(12H / 24H)
Description