Panasonic KX-TDA15 Features Manual page 252

1.20 Voice Mail Features
→ 3.9.19 [3-8-1] VM(DTMF) Group—System Settings—Others—Intercept Routing to the VPS
Sequence
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
Trunk Call
Operator
c)
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message
in the mailbox of the desired extension. (→ 1.11.1 Call Transfer) The extension user should use the
Voice Mail (VM) Transfer button, when transferring a call to the mailbox of the VPS. When the
extension user presses this button and enters the desired extension number, the PBX will transfer
the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without
knowing the mailbox number.
3.10.5 [4-1-4] Wired Extension—Flexible Button
3.10.10 [4-2-1] Portable Station—Extension Settings
3.10.17 [4-3] DSS Console—Flexible Button
252 Feature Guide
Parameter
Switching to VM command +
Recording message command (#6
+ H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
PBX
Transfer
Extn. 102
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Type
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
Transmitted Command
In AA Service Mode
Sent "#6" + "102".
Switching to VM command
FWD, Intercept
VM Port 1
VM Port X
In VM Service Mode
Recording message command (H
[H = Mailbox No.])
Switching to AA command (#8)
mailbox number
VPS (In AA service mode)
VM Port 2
VM (DTMF)
Group
VM Port 3