Panasonic KX-TDA15 Features Manual page 141

5.
Carrier Table Assignment
7
A specified number of carriers can be programmed. Assign the following items for each Carrier Table:
→ 3.14.6 [8-5] Carrier—Carrier
Carrier Name : Assign the carrier name.
8
→ 3.14.6 [8-5] Carrier—Carrier—Carrier Name
→ [350] ARS Carrier Name
Removed Number of Digits
dialled number.
→ 3.14.6 [8-5] Carrier—Carrier—Removed Number of Digits
→ [352] ARS Removed Number of Digits for Carrier Access
Carrier Access Code
→ 3.14.6 [8-5] Carrier—Carrier—Carrier Access Code
→ [353] ARS Carrier Access Code
Trunk Group : Assign the trunk groups which connect to each carrier.
11
→ 3.14.6 [8-5] Carrier—TRG 01–TRG 64 (KX-TDA30/KX-TDA100/KX-TDA200), or TRG 01–TRG 96
(KX-TDA600)
→ [351] ARS Trunk Group for Carrier Access
Modify Command
→ 3.14.6 [8-5] Carrier—Carrier—Modify Command
[Command Explanation]
Command
Number
C
P
A
G
I
H
: Assign the number of digits to remove from the beginning of the user-
9
: Assign the code to access the carrier.
10
: Assign the commands to modify the dialled number to access the carrier.
12
Add the number.
Add the Carrier Access code.
Analogue Line: Insert a pause.
ISDN Line: Insert a pause and change to tone (DTMF) signal.
Add the Authorisation code for a tenant ( ).
Add the Authorisation code for a trunk group ( ).
Add the Itemised Billing code ( ).
Add the dialled number after the digits are removed (Home position).
1.9 Automatic Route Selection (ARS) Features
Description
13
14
15
Feature Guide 141