Appendix 7: Removal Instructions - Enerzone Destination 2.3 Insert Installation And Operation Manual

Appendix 7: Removal instructions

For the purpose of inspecting the insert itself or the fireplace, your insert may need to be removed.
To remove your insert follow these instructions:
•
Remove the faceplate assembly (A) using the reverse steps of Appendix 3.
•
If installed, take-off the backing plates (B) and (C) and the projection kit by removing the
front screws securing them to the insert.
•
Remove the screws that secure the chimney liner to the fixation brackets (E).
•
Unscrew the leveling bolts (F) located on each side of the insert.
•
Pull-out the insert from the fireplace opening to perform the maintenance work.
54
Destination 2.3 Insert Installation and Operation Manual