Appendix 9: Removal Instructions - Enerzone DESTINATION 2.7 Installation And Operation Manual

APPENDIX 9: REMOVAL INSTRUCTIONS

For inspecting purposes, the insert may need to be removed. To remove the insert, follow these
instructions:
1. Remove the faceplate (A and B). Refer to
2. If installed, remove the cuttable faceplate (C) and the projection kit (D).
3. Remove the three screws securing the pipe connector (H).
4. Unscrew the bolts securing the insert to the floor on each side of the unit (G).
B
A
Installation and Operation Manual - Destination 2.7 Insert
«Appendix 3: Faceplate
D
C
Installation».
H
G
Page 53