Enerzone Destination 2.3 Insert Installation And Operation Manual page 45

Destination 2.3 Insert Installation and Operation Manual
1. To reverse the door handle (M),
unscrew the 2 bolts (L) to access the
handle guide (P).
spacers (B).
2. Remove the lock nut (N), then loosen
the shoulder screw (O) and remove
the washer (Q).
3. Remove the door handle (M) rotate it
a half of a turn and reinstall it in the
same location. Put back the spacers
(B).
4. Attach the door handle (M) and
washer (Q) on the handle guide (P)
with the shoulder screw (O). Make
sure the parts
assembled.
5. Screw the nut (N) to secure the
mechanism.
6. Reinstall the handle guide (P) with
the 2 bolts (A).
To adjust the tightness of the door with
spacers (B), see Section 5.1.2 Door
adjustment.
Remove the
are properly
45