Appendix 1: Reversing The Door Opening And Adjusting The Handle - Enerzone Destination 2.3 Insert Installation And Operation Manual

Appendix 1: Reversing the Door Opening and Adjusting the
Handle
The Destination 2.3 insert is equipped with a reversible door in case you prefer a door opening on
the other side. Follow the steps below if you wish to avail yourself of this
44
1. Remove the latch and hinge access plate
(A) by unscrewing screws (B).
2. Remove the latch (D) and reinstall the
screws that were securing the assembly into
the holes.
Note: To avoid dropping the door due to its
weight, get help from another person to
perform the following steps.
3. Remove screws (C) securing the hinges to
the firebox.
4. Rotate the door over 180 degree and
secure the hinges on the other side. It is
important to reinstall the screws in the holes
left by removal of the door.
Destination 2.3 Insert Installation and Operation Manual
feature: