Table of Contents
Advertisement
FIG. 23 Unsupported Input Resolution Screen
Displayed when Decoder....
• is set to view an Encoder stream on
the network
FIG. 24 Restricted Content Not Supported Screen
Displayed when Decoder....
• is receiving a stream from an
Encoder
• is connected to a monitor that does
NOT support Restricted Content
(i.e., the monitor is NOT HDCP
compliant)
NOTE: The Encoder must f irst be set up to pass HDCP-protected content.
N2000 Series User Manual
...and Encoder....
• is being fed a video resolution that
it does not support
...and Encoder....
• is transmitting HDCP-protected
content to the Decoder
Notes
This screen can be useful to show you that the
Decoder is receiving the stream from the
intended Encoder. However, the video signal
being sent to the Encoder is not supported.
Please refer to the AMX website???need link???
for the listing of supported resolutions.
Notes
Once the Decoder detects that the monitor is not
HDCP compliant, this screen is displayed. If you
suspect that this message was displayed in error,
please call Technical Support.
Troubleshooting
68
Advertisement
Table of Contents
