AMX NMX-ENC-N2122, NMX-DEC-N2222, NMX-DEC-N2212, NMX-ENC-N2135, AND NMX-DEC-N2235 Instruction Manual page 8

Svsi n2000 series encoders/decoders digital media distribution & switching solution
Table of Contents

Advertisement

1
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
5) IR Emitter Connection
N2135 Encoder Rear Panel
FIG. 6
1
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
N2235 Decoder Rear Panel
FIG. 7
Front and Rear Panel Descriptions
Front Panel
USB Mini-B port
USB Standard-A port (x2)
RESET button
ID button
POWER LED
STATUS LED
Rear Panel
+12V 2A
PWR LED
HDMI LED
STAT LED
STRM LED
P0 POE
N2000 Series User Manual
2
3
4
2
3
4
Connects the Encoder to the computer to be controlled (N2135 only).
Connects the Decoder to keyboard and/or mouse or touchscreen (N2235 only).
Recessed pushbutton. Press to initiate a "warm restart" which causes the processor to reset, but not lose
power. A reset does NOT affect the current settings.
Recessed pushbutton. Press to send notification out on the network to identify the unit (the notification
causes a pop-up dialog in N-Able and N-Command). Press and hold for 30 seconds to initiate a factory
restore.
On solid (green) when operating power is supplied (via PoE or local power supply). This activity is also
shown by the PWR LED on the rear panel.
On flashing (green) when there is software activity. This activity is also shown by the STAT LED on the rear
panel.
12 Volt DC power input.
Same as POWER LED described above.
On (green) when an HDMI connection exists.
Same as STATUS LED described above.
On (green) when the unit is streaming video.
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
Provides both the network connection and the power to the Encoders and Decoders.
*Not available on the N2212 Decoder.
5
6
7
6) RS232 Connection
7) Analog Audio Input
8) Passthru HDMI Video
9) HDMI Video Input
10) DB-15 Analog Input
5
6
7
5) IR Emitter Connection
6) RS232 Connection
7) Analog Audio Output
8) HDMI Video Output
Introducing Your New N2000 Series Devices
8
9
8
10
8

Advertisement

Table of Contents
loading

Table of Contents