AMX NMX-ENC-N2122, NMX-DEC-N2222, NMX-DEC-N2212, NMX-ENC-N2135, AND NMX-DEC-N2235 Instruction Manual page 69

FIG. 25 Video Source Outputting Restricted Content Screen
Displayed when Decoder....
• is receiving a stream from an
Encoder
FIG. 26 Video Encrypted Screen
Displayed when Decoder....
• is receiving a stream from an Encoder it can not decrypt
N2000 Series User Manual
...and Encoder....
• is receiving HDCP-protected
content from the video source, but
is not set up to pass it.
Notes
Make sure the Decoder has the correct password for decrypting
the stream. To reset the password, go to the Security page on
both the Encoder and Decoder and click the Reset button. Refer
to the Security Page section on page 61 if you are not sure where
to find this setting.
Notes
Please call SVSI Technical Support to enable this
feature.
Troubleshooting
69