Table of Contents
Advertisement
N-Act Page
Click the N-Act link at the top of any of the main web pages to access the page shown in
command lists which are performed automatically by the unit based on power or video connection (without the use of an outside
controller). For example, you can tell a projector and lights to come on when the Decoder powers up. You can add multiple
commands for each event. See
N-Act Page
FIG. 14
N-Act Page Options
TABLE 12
Option
Enable N-Act Events
Power on Event
Video Cable Connected
Event
Video Cable
Disconnected Event
Save Events
Import/Export
N2000 Series User Manual
Table 12
for option descriptions.
Description
Enable to activate the configured events.
Create/delete/test events to be performed when the Decoder powers on. Visit our website for more details on
Application Programming Interface (API) commands.
Create/delete/test events to be performed when the Decoder is connected to an output display. The Trigger
Delay field specifies how long the device has to be connected for the command to be executed.
Create/delete/test events to be performed when the Decoder is disconnected from the output display. The
Trigger Delay field specifies how long the device has to be disconnected for the command to be executed. This
keeps accidental (momentary) disconnects from triggering the command sequence.
Click to save changes made to this page.
Use this section of the page to import/export N-Act event configurations. from one unit to others.
Decoder Configuration Options
Figure
14. This page allows you to create
59
Advertisement
Table of Contents
