Parity Check - Newland NLS-HR200C User Manual

Parity Check

Check digits are optional for Plessey and can be added as the last two digits, which are calculated values
used to verify the accuracy of the data.
No Parity Check: The scanner transmits Plessey barcodes as is.
Do Not Transmit Check Digit After Parity Check: The scanner will run parity checks using the last two
digits of Plessey barcode as check digits. Barcodes passing the checks will be transmitted except the last
two digits, whereas those failing them will not be transmitted.
Transmit Check Digit After Parity Check: The scanner will run parity checks using the last two digits of
Plessey barcode as check digits. Barcodes passing the checks will be transmitted, whereas those failing
them will not be transmitted.
**【Do Not Transmit Check Digit After Parity Check】
113
If the Do Not Transmit Check Digit After Parity Check option is enabled, Plessey
barcodes with a length that is less than the configured minimum length after having
the check digits excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Parity Check option is enabled and the minimum length
is set to 4, Plessey barcodes with a total length of 4 characters including the check
digits cannot be read.)
【No Parity Check】
【Transmit Check Digit After Parity Check】
【Enter Setup】
**【Exit Setup】