Set Length Range For Interleaved 2 Of 5 - Newland NLS-HR200C User Manual

Set Length Range for Interleaved 2 of 5

The scanner can be configured to only decode Interleaved 2 of 5 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
【Set the Minimum Length (Default: 6)】
73
If minimum length is set to be greater than maximum length, the scanner only decodes
Interleaved 2 of 5 barcodes with either the minimum or maximum length. If minimum
length is same as maximum length, only Interleaved 2 of 5 barcodes with that length
are to be decoded.
Set the scanner to decode Interleaved 2 of 5 barcodes containing between 8
and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode "1".
7. Scan the numeric barcode "2".
8.
Scan the Save barcode.
9.
Scan the Exit Setup barcode.
【Set the Maximum Length (Default: 100)】
【Enter Setup】
**【Exit Setup】