Set Length Range For Pdf417 - Newland NLS-HR200C User Manual

【Enter Setup】

Set Length Range for PDF417

The scanner can be configured to only decode PDF417 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
【Set the Minimum Length (Default: 1)】
Minimum length is not allowed to be greater than maximum length. If you only want to
read PDF417 barcodes with a specific length, set both minimum and maximum
lengths to be that desired length.
Set the scanner to decode PDF417 barcodes containing between 8 and 12
bytes:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode "1".
7. Scan the numeric barcode "2".
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.
**【Exit Setup】
【Set the Maximum Length (Default: 2710)】
118