Set Length Range For Code 39 - Newland NLS-HR200C User Manual

Set Length Range for Code 39

The scanner can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
【Set the Minimum Length (Default: 4)】
81
If minimum length is set to be greater than maximum length, the scanner only decodes
Code 39 barcodes with either the minimum or maximum length. If minimum length is
same as maximum length, only Code 39 barcodes with that length are to be decoded.
Set the scanner to decode Code 39 barcodes containing between 8 and 12
characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode "1".
7. Scan the numeric barcode "2".
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.
【Set the Maximum Length (Default: 127)】
【Enter Setup】
**【Exit Setup】