Parity Check - Newland NLS-HR200C User Manual

Parity Check

A check digit is optional for Industrial 25 and can be added as the last digit. It is a calculated value used to
verify the accuracy of the data.
No Parity Check: The scanner transmits Industrial 25 barcodes as is.
Do Not Transmit Check Digit After Parity Check: The scanner will run a parity check using the last
digit of Industrial 25 barcode as check digit. Barcodes passing the check will be transmitted except the
last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Parity Check: The scanner will run a parity check using the last digit of
Industrial 25 barcode as check digit. Barcodes passing the check will be transmitted, whereas those
failing it will not be transmitted.
【Do Not Transmit Check Digit After Parity Check】
107
If the Do Not Transmit Check Digit After Parity Check option is enabled, Industrial
25 barcodes with a length that is less than the configured minimum length after having
the check digit excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Parity Check option is enabled and the minimum length
is set to 4, Industrial 25 barcodes with a total length of 4 characters including the
check digit cannot be read.)
**【No Parity Check】
【Transmit Check Digit After Parity Check】
【Enter Setup】
**【Exit Setup】