UPC-E
Restore Factory Defaults
Enable/Disable UPC-E
**【Enable UPC-E】
Transmit Check Digit
UPC-E is 8 digits in length with the last one as its check digit used to verify the accuracy of the data.
**【Transmit UPC-E Check Digit】
65
**【Restore the Factory Defaults of UPC-E】
If the scanner fails to identify UPC-E barcodes, you may first try this solution by
scanning the Enter Setup barcode and then Enable UPC-E barcode.
【Disable UPC-E】
【Do Not Transmit UPC-E Check Digit】
【Enter Setup】
**【Exit Setup】