Output Relay Control And Function - Arecont Vision AV12275DN-NL Installation Manual

SurroundVideo® O mni G 2

OUTPUT Relay Control and Function

The camera has an output for activating an external device. The camera supports both transient and
continuous relay operation. You can operate the relay during an active connection using the API
command set. Typical applications include turning on lights or activating doors and locks.
Figure 3: Relay wiring with power source to the camera
Camera output can be turned on|off with the following command:
http://camera_ip/set?auxout=("on"|"off")
The following table shows the output control and electrical characteristics:
Terminals
OUT+ &
OUT-
Page | 30 support@arecontvision.com
+1.818.937.0700 877.CAMERA.8
Output Control
External Camera
Status Status
OPEN OFF
CLOSED ON
www.arecontvision.com avsales@arecontvision.com
+
0-­‐120VDC
100mA
-­‐
(max)
Max Max
Voltage Current
120V
- 100mA
Installation M anual
-