Turning The Projector On; Projector Led Status Indicators - Christie boxer 4K30 User Manual

Turning the projector on

When the projector AC power supply is plugged in, the power is on.
Warning! Failure to comply with the following could result in death or serious injury.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and power range, as specified on the license label.
1. Plug the projector in to AC power.
The projector automatically powers on when plugged in. The side panel display functionality
becomes available.
2. To turn the lamps on, press and hold the Power button until you hear a beep.

Projector LED status indicators

Identify the LED state colors and meaning.
LED State
Blue Solid
Flashing
Green Solid
Flashing
Yellow Solid
Flashing yellow/green
Flashing
Flashing yellow/blue
Red Solid
Boxer 4K30 User Manual
020-101777-03 Rev. 1 (11-2015)
Description
Standby Lamps are off. Video electronics are off. Projector
status is OK.
Cool down Projector is moving to one of the two standby
states:
• Lamps are off and video electronics are
booting up.
• Lamps are off. Video electronics and lamps are
cooling down.
Lamps on Lamps are on. Projector status is OK.
Startup Projector is moving to lamp on state. Lamps are
striking and warming up. Video electronics are
initializing.
Warning in Projector is in standby state. A problem exists with
standby the projector that does not prevent it from
operating.
Warning during Projector is in a startup state. A problem exists
startup with the projector that does not prevent it from
operating.
Warning with Lamps are on. A problem exists with the projector
lamps on that will not cause it to shut down.
Warning during Projector is in a cool down state. Lamps are off.
cool down Video electronics and lamps are cooling down. A
problem exists with the projector that does not
prevent it from operating.
Error in Projector is in standby. An error exists that
standby prevents the projector from starting up.
Introduction
15