•
Thermal Sensors
•
Power
3. To enable additional traps, repeat step 2.
Defining a trap IP address
When a trap condition is met, a notification is sent using an SNMP notification to one or more specified
IP addresses.
1. Select MENU > Communications > SNMP.
2. Select Address 1.
3. Use the up and down arrows to enter an IP address.
4. To confirm the address, select Enter.
5. To add a second and third IP address, repeat steps 2 to 4 for Address 2 and Address 3.
Restoring factory default settings
Restoring factory settings removes all custom projector settings.
Only Christie qualified technicians can reset factory defaults.
1. From the home page, select MENU > Admin > Service.
2. Enter the service password.
3. Select Reset Factory Defaults.
All customized settings are set to the default factory settings.
Boxer 4K30 User Manual
020-101777-03 Rev. 1 (11-2015)
Diagnostic tools
36