Connecting To An Analogue Audio Amplifier; Connecting A Usb Storage Device; Starting Up For The First Time - Strong SRT 8202 User Manual

3.6 Connecting to an analogue Audio Amplifier

Use a good quality cable with 3.5 mm jack to connect your receiver to the analogue input of your
Hi-Fi audio amplifier for achieving best possible analogue audio quality.

3.7 Connecting a USb storage device

Connecting a USB device to the unit allows you to playback multimedia files. See chapter 7.5. Media
Player.
noTE
noTE

4.0 STARTInG UP foR THE fIRST TIME

When you use your receiver for the first time, please select your menu language using pq and press
ok to confirm selection.
You will follow to the "Welcome" menu. Use pq to move the highlight to the setting you wish to
alter and use tu to change values. Highlight ok and confirm all selections.
Region:
Subtitle:
Aspect Mode:
Scan mode:
Connection:
noTE
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
**Encrypted channels cannot be viewed with this receiver.
8
It is recommended to use USB 2.0 storage devices or higher for recording
and play back of TV programmes or HD movies.
Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
Select your region where this receiver is used.
Select Normal to display subtitles per default, Select Hard of Hearing to show
HoH subtitles per default. Select Off to hide subtitles per default.*
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this
setting for 16:9 TV sets).
Select All to store scrambled and free to air channels or select Free to store
only free to air channels.**
Use this option to adjust the established connection to your TV set. Select
HDMI or TV SCART.
The wrong region selection can lead to missing channels or the channels
can be stored with wrong positions in the channel list.
Fig. 7
Fig. 8