Installing The Batteries; Using The Remote Control - Strong SRT 8202 User Manual

Digital terrestrial hd receiver
Table of Contents

Advertisement

11. ok
12. RECoRD
13. TIMESHIfT
14. 0~9
15. EPG
16. RECALL
17. AUDIo
18. Tv/RADIo
19. fAv
20. fILE
21. TTX
22. SUbTITLE
23. 5 6
24. Coloured buttons For Multimedia and Teletext functions

2.5 Installing the batteries

Open the cover on the remote control and insert 2x AAA batteries into the compartment. Correct
position of the polar diagram shows the batteries inside the compartment.
1. Open the cover.
2. Insert the batteries
3. Close the lid.
WARnInG

2.6 Using the remote control

To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
noTE:
6
Menu Off: Displays the current channel list. Menu On: Activates
the highlighted menu item.
Records the TV programme to the connected USB storage device
Activates the Timeshift function (Off/On)
Enters a channel number in viewing mode or a value inside the
respective menu
Opens the EPG (Electronic Programme Guide) in TV mode
Back to previously watched channel
Opens the audio language selection
Toggles between TV or RADIO mode
Opens the favourite group selection
Opens the Media Player Video list
Displays Teletext on the OSD (On Screen Display)
Shows a list of subtitle languages
Fast rewind/fast forward
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver)
and the remote control. Direct sunlight or very bright light can reduce or
disturb the reception of the remote control signals.
Fig. 4
Fig. 5

Advertisement

Table of Contents
loading

Table of Contents