Media Player - Strong SRT 8202 User Manual

7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version. It
also displays our web address www.strong.tv.
Please have the Information screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
7.4.2 Load factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
Warning!
Use pq to select Load Factory Settings in the Tools menu and press ok. You are asked to input your
PIN code.
Input the correct PIN code using the 0~9 (DEfAULT PIn: 1234). A confirmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W Upgrade by oTA
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update
might not be available in your region.
Please visit our website www.strong.tv or contact your local service hotline for more information
about this option.
7.4.4 Upgrade by USb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv. For USB upgrading
procedure please follow provided on web-site instruction
WARnInG!
7.4.5 Auto-update oTA
If set to On the unit will check automatically at the moment of going to stand-by for an Over The
Air software upgrade. An Over The Air update might not be available in your region. Please visit our
website www.strong.tv or contact your local service hotline for more information about this option.

7.5 Media Player

The Media Player menu consists of the following submenus: Records, Video, Music, Image, HDD
Information, DVR Setting and Remove USB device safely.
Use pq to highlight the menu of choice and press ok to enter. Press EXIT to quit.
18
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!