Simrad GO XSE Installation Manual page 53

The unit may be used to apply software updates to itself, and to
supported network devices, with files read off a memory card
inserted in the card reader.
Before initiating an update to the unit itself, be sure to back up any
potentially valuable user data.
Backing up and Importing user data
There are two files that can be backed up that relate to user
changes made to the system:
• Waypoints, Routes, and Tracks database.
• Settings database (includes preferences such as unit settings,
custom pages, and CZone configuration files).
Insert a memory card into the unit's card reader as a storage
location for backup data.
Waypoints, Routes, and Tracks database backup
You can export all Waypoints, Routes, and Tracks, or export only
those contained within a specific region.
If Export Region is selected, the chart page will be displayed,
centered on vessel location. Using the touch screen, adjust the red
boundary box to outline the area to be exported. The export option
offers different file formats to save as:
User data file version 5: Use with current units (NSO evo2, NSS
•
evo2, NSS, NSO, NSE, Zeus, Zeus Touch, HDS Gen2, HDS Gen2
Touch, HDS Gen3, GO XSE units, Vulcan units, and ELITE Ti units).
Offers most detail.
User data file version 4: Use with current units (NSO evo2, NSS
•
evo2, NSS, NSO, NSE, Zeus, Zeus Touch, HDS Gen2, HDS Gen2
Touch, HDS Gen3, GO XSE units, Vulcan units, and ELITE Ti units).
User data file version 3 (with depth): Use with legacy GPS
•
chartplotters.
User data file version 2 (no depth): Use with legacy GPS
•
chartplotters.
GPX (GPS Exchange, no depth): Use with some other
•
manufacturers' GPS products, and PC applications.
After you select the file type, select Export and destination memory
card. The receiving GPS/PC typically needs to be set to allow import
of Waypoints.
Software Setup | GO XSE Installation Manual
53