Reboot; Figure 16: Gxv3275 Ucm Auto Config Number - Enabling Registering Number - Grandstream Networks GXV3275 Administration Manual

Ip multimedia phone for android

Hide thumbs Also See for GXV3275:

Table of Contents

Figure 16: GXV3275 UCM Auto Config Number – Enabling Registering Number



Upgrade

Upgrade mode: This field allows the user to choose the firmware upgrade method: TFTP, HTTP

or HTTPS.

Firmware upgrade and provisioning. Defines the rules for automatic upgrade: Always Check at

bootup, when F/W pre/suffix changes, Skip the Firmware Check.

HTTP/HTTPS user name. The user name for the HTTP/HTTPS server if set up on the server side.

HTTP/HTTS password. The password for the HTTP/HTTPS server if set up on the server side.

Firmware server path. This defines the server path for the firmware server. It can be different

from the configuration server for provisioning.

Config server path. This defines the server path for provisioning. It can be different from the

firmware server for upgrading.



Syslog

Syslog level

Select the level of logging for syslog. The default setting is "None". There are 4 levels: DEBUG,

INFO, WARNING and ERROR.

Syslog server address

The URL/IP address for the syslog server. If the GXV3275 has network connection, the phone will

send the syslog packets to this server address.



Factory reset. Open and tap on Factory Reset to restore the GXV3275 to factory default settings.



Developer mode. This mode can be used via ADB tool for advanced debugging purpose.

Reboot

Tap on "Reboot" to reboot the device.

GXV3275 Administration Guide

P a g e

Table of Contents