Grandstream Networks GXV3275 Administration Manual page 55

Ring Timeout (s)
Virtual Account Group
Transfer on 3 way
Conference Hang up
Use # as Dial Key
DND Call Feature On
DND Call Feature Off
Conference URI
BroadSoft Call Center
Hoteling Event
Call Center Status
Account Ring Tone
The valid range is from 1 to 15. This feature does not work if the dialer page is entered
via the Account Widget on the phone.
Defines the expiration timer (in seconds) for the rings with no answer. The default
setting is 60. The valid range is from 10 to 300.
It is used to set to categorize accounts in server mode groups, the accounts in the
same group will be combined as one and the account widget will display the Caller ID
in the account with lowest ID. The phone can answer any incoming calls to each
account in groups. If user makes an outbound call, the phone system will use the
lowest ID account by default. If the account fails or SIP INVITE message is timeout,
the phone system will failover to the next account in the group with higher account ID.
If all the accounts are not available in the group, the phone system will traverse all the
accounts in the group and notify the end users the session is failed.
Transfers conference from hosted party when hang up, thus other parties can continue
the conference without interruption. The default setting is unchecked.
Treats "#" as the "Send" (or "Dial") key. If set to "No", this "#" key can be included as
part of the dialed number (please make sure the dial plan is properly configured to
allow dialing # out). The default setting is "Yes".
Configures the feature code to enable the DND (Do Not Disturb) feature for this
account. If it is configured, the phone will dial the feature code automatically when the
DND feature is enabled.
Configures the feature code to disable the DND (Do Not Disturb) feature for this
account. If it is configured, the phone will dial the feature code automatically when the
DND feature is disabled.
Configures the network based conference URI (the BroadSoft Standard). If it is
configured, end user needs to tap the N-way key during the conference to transfer the
host to the remote media server.
Enables the BroadSoft Call center feature for this account. If set to "Yes", the soft key
"CallCenter" is displayed on LCD dial screen for the BroadSoft account. User can
access different BroadSoft Call Center agent features via this softkey. Please note that
"Feature Key Synchronization" will be enabled regardless of this setting. The default
setting is "No".
Enables or disables the BroadSoft Hoteling event feature. It must turn on the BroadSoft
call center feature before enabling this feature. With "Hoteling Event" enabled, user
can access the Hoteling feature option by tapping the "Call Center" key in the Phone
app. The default setting is "No".
Obtains the BroadSoft Call center status, when set to "Yes", the phone will send SIP
SUBSCRIBE message to the server to get call center status. It must turn on the
BroadSoft call center feature before enabling this feature. The default setting is "No".
Configures the ringtone for the account. Users can set ringtones from the dropdown
list. User can also import customized ringtone from LCD Setting menu. The customized
ringtone file name will also be showed up in the dropdown list that allows user to select.
GXV3275 Administration Guide
P a g e | 55