Reboot - Grandstream Networks GXV3240D Administration Manual

 Config Server Path:This defines the server path for provisioning.It can be different from the
firmware server for upgrading.

Syslog
 Syslog Level
Select the level of logging for syslog. The default setting is "None".There are 4 levels:DEBUG,
INFO, WARNING andERROR.
 Syslog Server Address.The URL/IP address for the syslog server. If the GXV3240D has network
connection, the phone will send the syslog output to this server address.

Factory Reset. Open and tap on Factory Reset to restore the GXV3240D to factory default settings.

Developer mode.This mode can be used via ADB tool for advanced debugging purpose.

REBOOT

Tap on "Reboot" to reboot the device.
Firmware Version 1.0.1.54 GXV3240D Administration Guide Page 33 of 83