Ethernet Settings; Wi-Fi Settings - Grandstream Networks GXV3275 Administration Manual

Ethernet Settings

Configure DHCP, Static IP or PPPoE to for the phone to access network via Ethernet settings.

If DHCP is selected, the phone will get IP address automatically from the DHCP server in the network.
This is the default mode.

If Static IP is selected, manually enter the information for IP Address, Subnet Mask, Default Gateway,
DNS Server and Alternative DNS server.

If PPPoE is selected, type PPPoE Account ID and PPPoE Password provided from the PPPoE server
to get authenticated for network access.

Wi-Fi Settings


Tap on "Wi-Fi" to turn on/off Wi-Fi connection. By default, it's turned off.

Tap on "Wi-Fi Settings" to set up and manage wireless access points. This option is available only
when Wi-Fi is turned on.
WPS Push Button. Press MENU button
-
secure Wi-Fi network setup. Once selected, check your router and press the Wi-Fi Protected Setup
(WPS) button on the router so that the Wi-Fi connection and security can be automatically set up
between the phone and the router. The phone should get network connection shortly after
successfully setup.
Add Network. If the Wi-Fi network SSID doesn't show up in the list, or users would like to set up
-
advanced options for the Wi-Fi network, press MENU button
Enter SSID, Security type, password and set up address type (DHCP/Static IP/PPPoE) in the
prompt dialog. The phone will reboot with Wi-Fi network connected.
Scan. Press MENU button
-
range.
WPS Pin Entry. Press MENU button
-
Fi network setup. Once selected, a randomly generated PIN number will show on the phone for
you to enter it on your Wi-Fi router. The setup can take up to 2 minutes to complete and the phone
should get network connection once done.
Wi-Fi Direct. This is to set up peer-to-peer connection between two Wi-Fi Direct devices so that
-
they can share data and sync files. Press MENU button
Then tap on the available peer device to initiate connection.
Advanced Settings. Press MENU button
-
Network notification: If enabled, the phone will show notification on the top status bar
o
indicating an open network is available. By default it's enabled.
Avoid poor connections: If enabled, Wi-Fi network won't be used unless the connection
o
is good. By default it's disabled.
MAC address: This shows the MAC address of the phone.
o
IP address: This shows the IP address of the phone from Wi-Fi network.
o
and select "WPS Push Button" for an easy and
and select "Scan" to initiate scan for the Wi-Fi network within the
and select "WPS Pin Entry" for an easy and secure Wi-
and select "Advanced".
GXV3275 Administration Guide
and select "Add Network". Then
button and select "Search for devices".
P a g e | 26