Advanced Settings/Mpk General Settings - Grandstream Networks GXV3275 Administration Manual

Paging Priority Active
Multicast Paging Codec
Enable Multicast Paging
Video
Multicast Paging Video
Codec
Multicast Paging Image
Size
Multicast Paging Video Bit
Rate
Multicast Paging Video
Frame Rate
Multicast Paging H.264
Profile Type
Multicast Paging H.264
Payload Type
Multicast Listening
Address

Advanced Settings/MPK General Settings

BLF Call-pick Prefix
Event List URI
Force BLF Call-pickup by
Prefix
Determines if a new paging call whose priority is higher than the existing paging
call will be answered. If it is checked, this feature will be enabled. The default setting
is disabled.
Selects the codec type for the multicast paging call. This list includes PCMU,
PCMA, G726-32, G722, and G729A/B.
Enables the video feature to establish a multicast paging call. The default setting is
disabled.
Sets the video codec for the multicast paging call. The default setting is "H.264".
Sets the video image size for the multicast paging call. This list includes 720P, 4CIF,
VGA, CIF, QVGA, and QCIF.
Determines the video bit rate for the multicast paging call. The default setting is
"256 kbps".
Configures the video frame rate for the multicast paging call. This list includes "15
frames/second", "25 frames/second", "30 frames/second", and "Variable frames
rate".
Specifies the H.264 codec profile type for the multicast paging call. This list includes
"Baseline Profile", "Main Profile", and "High Profile".
Determines the H.264 codec payload type for the multicast paging call. The default
setting is "99".
Configures the IP address and port number for monitoring multicast paging call.
When the initiator initiates a call, answer the call and display listening address and
tag of the monitoring target. This feature supports Video Multicast, when the initiator
initiates Video Multicast, it will automatically add the number 2 on the port of the
listening address. Reboot the phone to make changes take effect. The valid IP
address ranges from 224.0.0.0 to 239.255.255.255. Users may also fill the label for
each listening address corresponding to the priority.
Configures the prefix prepended to the BLF extension if the phone answers a call
to the monitored party by the BLF key. The default setting is ** for each account.
Determines the event list BLF URI on the phone to monitor the extensions in the list
with MPK keys. This feature is based on BroadSoft standard. It requires filling in the
BLF ID to the box. For example, if the server provides the URI:
BLF123@myserver.com, this field should be filled with BLF123. Then the monitored
extensions will be populated in the MPK app or Extension Board (if supported).
Uses the prefix for BLF Call-pickup. The default setting is "No".
GXV3275 Administration Guide
P a g e | 63