Grandstream Networks GXV3275 Administration Manual page 54

Auto Answer
Send Anonymous
Anonymous Call Rejection
Call Log
Special Feature
Configure Door System
Feature Key
Synchronization
Enable BroadSoft Call Park
Enable Call Features
No Key Entry Timeout (s)
Sets the phone system to allow to answer an incoming call automatically. If it is set to
"Yes", the phone will automatically enable the speaker phone to answer all the
incoming calls after a short reminding beep. If set to "Enable Intercom/Paging", it will
automatically answer the incoming calls whose SIP INVITE includes auto-answer tag
in the info header. The default setting is "No".
Sets the phone system to make an anonymous outgoing call. If it's set to "Yes", the
"From" header in the SIP INVITE messages will be set to anonymous, essentially
blocking the Caller ID to be displayed. The default setting is "No".
Rejects the calls whose SIP INVITE message includes Anonymous information in from
header when enabled. The default setting is "No".
Categorizes the call logs saved for this account. If it is set to "Log All", all the call logs
of this account will be saved. If set to "Log Incoming/Outgoing Calls (Missed Calls Not
Record)", the whole call history will be saved other than missed call. If it is set to
"Disable Call All", none of the call history will be saved. If it is set to "Don't Prompt
Missed Call", the phone will log the missed call histories, but there is no prompt to
indicate the missed calls on phone LCD. The default setting is "Log All".
Configures phone's settings to meet different vendors' server requirements. Users can
choose from Standard, BroadSoft, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix,
ZTE NGN, Huawei IMS, NEC, WorldStone, or Baudisch Door System, depending on
the server type. The default setting is "Standard".
Note: When set "Special Feature" to "Baudisch Door System", 5 groups of door system
URL and User ID will show up for users.

Baudisch Door System URL: This is used to input IP address or URL of the
system to make sure the account could identify the call from door system.

Baudisch Door System SIP User ID: This is used to configure the User ID of
door system. Once configured, only the call from this User ID would use door
system while other calls use standard mode.
Specifies which calls from specific ID will be using door system; others will use
standard mode. Click on "Configure" to access the configuration page, fill in IP address
or URL and user ID.
Synchronizes the BroadSoft standard call feature. If it is enabled, the phone will send
SIP SUBSCRIBE message to the server and receive SIP NOTIFY message from the
server to synchronize the DND, Call Forwarding and Call Center features. The default
setting is "Disable".
Configures whether to send SUBSRCIRBE message to BroadSoft server to obtain Call
Park notifications. The default setting is "No".
Configures the local start command feature. If it is set to "Yes", the feature will be
enabled to recognize the local star code command. Otherwise, it will be disabled. The
default setting is "No".
Determines the expiration timer (in seconds) for no key entry. The dialed digit will be
send out if no other digits entered within the set period. The default value is 4 seconds.
GXV3275 Administration Guide
P a g e | 54