Grandstream Networks GXV3275 Administration Manual page 65

DHCP Host name (Option
12)
DHCP Vendor Class ID
(Option 60)
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
PPPoE Account ID
PPPoE Password
Alternate DNS Server
Second Alternate DNS
Server
Show IP Address On
Account Widget
Enable LLDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 3 QoS for Video
Layer 2 QoS 802.1Q/VLAN
Tag (Ethernet)
Layer 2 QoS 802.1p Priority
Value (Ethernet)
Layer 2 QoS 802.1Q/VLAN
Tag (Wi-Fi)
Layer 2 QoS 802.1p Priority
Value (Wi-Fi)
PC Port VLAN Tag
server to set local network.
The default setting is "No".
Sets the name of the client in the DHCP request. It is optional but may be required
by some Internet Service Providers.
Configures the vendor class ID header in the DHCP request.
The default setting is Grandstream GXV3275.
Defines the phone's static IP address if the static IP is used.
Determines the network's subnet mask if the static IP is used.
Defines the network's gateway address if the static IP is used.
Configures the primary DNS IP address if the static IP is used.
Configures the secondary DNS IP address if the static IP is used.
Configures the PPPoE account ID if the PPPoE is used.
Sets the PPPoE password if the PPPoE is used.
Defines the secondary DNS IP address if the static IP is used.
Configures the secondary alternate DNS IP address to failover during both the
default DNS server and alternate DNS server's outage.
Shows IP address of the phone on desktop account widget.
The default setting is "Yes".
Enables the LLDP (Link Layer Discovery Protocol) feature on the phone system. If
it is set to "Yes", the phone system will broadcast LLDP PDU to advertise its identity
and capabilities and receive same from a physical adjacent layer 2 peer. The
default setting is "Yes".
Defines the Layer 3 packet's QoS parameter for SIP messages in decimal pattern.
This value is used for IP Precedence, Diff-Serv or MPLS. The default setting is 48
which is equivalent to the DSCP name constant CS6.
Defines the Layer 3 packet's QoS parameter for RTP messages in decimal pattern.
This value is used for IP Precedence, Diff-Serv or MPLS. The default setting is 48
which is equivalent to the DSCP name constant CS6.
Defines the Layer 3 packet's QoS parameters for H.264 messages in decimal
pattern. This value is used for IP Precedence, Diff-Serv or MPLS.
The default setting is 48 which is equivalent to the DSCP name constant CS6.
Assigns the VLAN Tag of the Layer 2 QoS packets for Ethernet.
The Default value is 0.
Assigns the priority value of the Layer 2 QoS packets for Ethernet.
The Default value is 0.
Assigns the VLAN Tag of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
Defines the VLAN Identifier of the Layer 2 frame for PC port. This tags the VLAN
GXV3275 Administration Guide
P a g e | 65