Advanced Settings/Mpk Lcd Settings; Maintenance Page Definitions; Maintenance/Network Settings - Grandstream Networks GXV3275 Administration Manual

Advanced Settings/MPK LCD Settings

Key Mode
BLF List
Account
Name
UserID
Display Format
Show Display Name from
Server

Maintenance Page Definitions

Maintenance/Network Settings

Address Type
Enable DHCP VLAN
Assigns a function to the Multi-Purpose Key in the MPK app
The key mode options are:

Speed Dial
Press to dial the extension configured in UserID field.

Busy Lamp Field (BLF)
Monitor the extension status as configured in UserID field.

Call Transfer
Transfer the current active call to the extension configured in UserID field.

Call Intercom
Intercom/paging to the extension configured in UserID field.

Speed Dial via Active Account
Similar to Speed Dial but it will dial based on the current active account. For
example, if the phone is offhook and account 2 is active, it will call the
configured extension using account 2.

Dial DTMF
Dial the DTMF digits filled in UserID field during a call.

Call Park
Configure the call park feature code to park or pick up the call.

Multicast Paging
Configure the IP address and port for establish a multicast paging call.
Displays the configured MPK keys. Users could change the keys order by selecting
"Up", "Down", "Check All", or "Delete
Selects the SIP Account assigned with the multi-purpose keys.
Configures the display name for the multi-purpose key.
Specifies the UserID for the corresponding multi-purpose key mode.
Sets the display format for the multi-purpose keys. Users could select display
"Name", "UserID", or "Name (UserID)". "Name" is the one saved in phone contacts.
The default setting is "Name".
Permits the system to display name from server side. The default setting is "No".
Configures the appropriate network settings on the phone. Users could select from
"DHCP", "Static IP" or "PPPoE"(Point-to-point Protocol over Ethernet). By default,
it is set to "DHCP".
Enables the DHCP VLAN function. Once enabled, the device will use DHCP option
132 (802.1Q VLAN ID) and DHCP option 133 (QOS priority level) sent by DHCP
GXV3275 Administration Guide
P a g e | 64