Gxv3275 Phone Setup; Using The Phone Stand; Using The Slots For Wall Mounting; Connecting The Gxv3275 - Grandstream Networks GXV3275 Administration Manual

GXV3275 Phone Setup

The GXV3275 can be installed on the desktop using the built in stand or attached on the wall using the
slots for wall mounting.

Using the phone stand

The GXV3275 has a built-in phone stand. To use it, pull out the phone stand handle on the back of the
phone. Adjust the angle as preferred and make sure the phone stands still on the desktop

Using the slots for wall mounting

1. Attach the wall mount to the slots on the back of the phone;
2. Attach the phone to the wall via the wall mount hole;
3. Pull out the tab from the handset cradle (see figure below);
4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the
phone is mounted on the wall.

Connecting the GXV3275

To setup your GXV3275, please follow the steps below:
1. Connect the handset and main phone case with the phone cord;
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
3. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 2, this step could be skipped;

Figure 2: Built in stand and mounting slots on the GXV3275.

Figure 3: Tab on the handset cradle.

GXV3275 Administration Guide
P a g e | 20