Grandstream Networks GXV3275 Administration Manual page 69

Download Device
Configuration
Upload Device
Configuration
Configure via Keypad
Menu
Always send HTTP Basic
Authentication Information
Validate Certification Chain
mDNS Override Server
Allow DHCP Option 43 and
Option 66 to Override
Server
DHCP Option 120 Override
SIP Server
Allow DHCP Option 242
(Avaya IP Phones)
Enable PNP Feature
PNP URL
PnP(3CX) Auto Provision
Automatic Upgrade
Downloads the phone's configuration file in text format. The config file includes all
the P value parameters for phone's current settings except password for security
purpose. Users can use the Grandstream configuration file generator to generate
binary config file from this text file.
Uploads configuration file to the phone.
Specifies the end user's right to access the Settings from LCD screen. There are
two different options: Unrestricted and Basic settings only. If the phone enables
the Basic settings only, the Advanced settings options in Settings will be hidden.
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server. Default is No.
Configures whether to validate the server certificate when download the
firmware/config file. If it is set to "Yes", the phone will download the firmware/config
file only from the legitimate server. The default setting is "No".
Sets the phone system to broadcast the Multicast DNS (mDNS) message during
booting up to allow itself to be discovered and be configured by the SIP platform. If
it is set to "User Type A', the phone system will broadcast the MDNS message
"A_grandstream-cfg.local"; if it is set to "Use Type SRV", the MDNS message will
be "SRV_grandstream-cfg.local". The default setting is "Use Type A".
Obtains configuration and upgrade server's information from DHCP server using
options 66 and 43. Note: If DHCP Option 66 is enabled, the GXV3275 will attempt
downloading the firmware file from the server URL provided by DHCP, even though
Config Server Path is left blank.
Configures the phone system to allow the DHCP offer message to override the
Config Server Path via the Option 120 header. The default setting is "Yes".
Enables DHCP Option 242. Once enabled, the phone will use the configuration info
issued by the local DHCP in Option 242 to configure proxy, transport protocol and
server path.
The default setting is "Yes".
Enables the PNP (Plug and Play) feature on the device. If it is enabled, the device
will be set as a provision server to send SIP NOTIFY message including the
provision URL to response the client phone's SIP SUBSCRIBE request. This
feature will be enabled if the PNP URL is configured. If this setting is enabled, the
3CX Auto provision will be disabled automatically.
Configures the URL to provision other client phone's config server path. The URL
will be included in the SIP NOTIFY message.
Sets the phone system to broadcast the SIP SUBSCRIBE message during booting
up to allow itself to be discovered and be configured by the SIP platform. The
default setting is "Yes".
Determines how the phone system will check the server for new firmware and
configuration file downloading. It can be selected from list below:
GXV3275 Administration Guide
P a g e | 69